DS SUPER PH1000M STC

Men watch ∙ Automatic ∙ Blue ∙ Super-LumiNova ∙ Quick-release system ∙ Rubber

Reference: C024.907.17.041.10
GBP 885.-
?
With its latest timepiece, Swiss watch brand Certina reaffirms its unwavering passion for the depths of the oceans. The DS SUPER PH1000M first appeared in 1970, causing a sensation both above and below the water. The distinctive wristwatches are powered by a cutting-edge automatic caliber with an 80-hour power reserve and NivachronTM balance spring.

Variants

Technical specifications

Reference
C024.907.17.041.10
Warranty
2-year warranty
Specialities
Special edition
Weight net
120.00g
Color
Blue
Material
Super-LumiNova
Material
Quick-release system
Rubber
Buckle material
316L stainless steel
Reference
C024.907.17.041.10
Warranty
2-year warranty
Specialities
Special edition
Weight net
120.00g
Case material
316L stainless steel
Bezel material
316L stainless steel
Aluminium
Super-LumiNova
Glass
Antireflection treatment on one side
Sapphire crystal
Water resistance
Up to a pressure of 100 bar (1000 m)
Diameter
43.50mm
Height
14.15mm
Between lugs
20.00mm
Color
Blue
Material
Super-LumiNova
Material
Quick-release system
Rubber
Buckle material
316L stainless steel

Materials

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

Aluminium

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only. Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be produced in any colour chosen by the designers.

aluminum

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

super-luminova

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

Aluminium

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only. Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be produced in any colour chosen by the designers.

aluminum

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

super-luminova

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal

More about this model

Partner of Sea Turtle Conservancy

In 2017, Certina became a proud partner of the Sea Turtle Conservancy. The Florida-based organisation, whose primary aim is to ensure the survival of the sea turtle and conserve its habitats in the Caribbean, was founded in 1959 - the same year that Certina developed the ultra-resistant DS Concept.

Certina partner of Sea Turtle Conservancy

Special packaging

A special timepiece deserves a very special setting: This watch is presented in high-quality special packaging that not only protects it securely, but also emphasises its individual character.

Special packaging DS SUPER PH1000M STC

Partner of Sea Turtle Conservancy

In 2017, Certina became a proud partner of the Sea Turtle Conservancy. The Florida-based organisation, whose primary aim is to ensure the survival of the sea turtle and conserve its habitats in the Caribbean, was founded in 1959 - the same year that Certina developed the ultra-resistant DS Concept.

Certina partner of Sea Turtle Conservancy

Special packaging

A special timepiece deserves a very special setting: This watch is presented in high-quality special packaging that not only protects it securely, but also emphasises its individual character.

Special packaging DS SUPER PH1000M STC